How can we help?

This page provides information on connecting to an Allen & Heath Qu console over a network.

The following consoles are capable of being connected over the network:

• Qu-5/Qu-5D

• Qu-6/Qu-6D

• Qu-7/Qu-7D

• Qu-16

• Qu-24

• Qu-32

• Qu-Pac

• Qu-SB

Qu-5/Qu-5D, Qu-6/Qu-6D, Qu-7/Qu-7D

You can control your Qu-5/Qu-5D, Qu-6/Qu-6D, Qu-7/Qu-7D console using the official Qu MixPad app available for iPadOS and Android:

• Qu MixPad - iPadOS

• Qu MixPad - Android

Qu-16, Qu-24, Qu-32, Qu-Pac, Qu-SB

You can control your Qu-16, Qu-24, Qu-32, Qu-Pac, Qu-SB console using the official QuPad app for iPadOS. Allen & Heath did not make an Android version of the QuPad app. If you are using an Android tablet/phone, we've had success with the third-party Mixing Station app.

• QuPad - iPadOS

• Mixing Station - Android (third party)

Notes

No matter which Allen & Heath Qu console you're connecting to, please note the following items if your console is connected to a KSL-supplied network:

• IP Address:

  • If you have a wireless router in your system, the wireless router will provide your device with an IP address.

  • If you have a wireless access point in your system, you will need to set a static IP address on your device.

  • Please see Do I have a Wireless Router or a Wireless AP? and Setting a Static IP Address for additional information.

• If your console and network were both provided and installed by KSL, your console has been tested and configured to work with the lighting network.

• You may have to configure your mobile device to get an IP address on the network, to be able to communicate with the console. Please see Setting a Static IP Address for additional information.